Railblaza CleatPort
€18.00
Also included is our unique backing plate, designed to keep stainless fastenings isolated from aluminium decks to avoid corrosion.
MOUNTING INSTRUCTIONS:
- Drill holes using the backing plate as a guide.
- Stack plate and cleat in place then fit the two M6x25 screws in the two holes in line with the cleat handles.
- Tighten nuts or screw heads to a firm tension.
- Position StarPort on top lining the holes up with the two spare holes on the Cleat and fit the two M6x35 screws
- Repeat Step 3.
– Ensure you have adequate clearance behind the surface for screw and/or bolt penetration, and that no cabling, plumbing or rigging will be adversely affected.
In the box
1 x CleatPort Moulding
1 x StarPort
1 x Backing plate
2 x M6 x 25mm Machine Screws
2 x M6 x 35mm Machine Screws
4 x M6 Nuts
4 x M6 Washers
Description
Two applications in one.
It’s a simple idea, but very effective. Now your cleat can hold your fishing rod, mobile phone, drink, navlight, or anything else that a RAILBLAZA accessory can hold.
The cleat gives you a tie off point for stern lines and bow lines on small craft. The StarPort gives the extra functionality of adding any RAILBLAZA accessory.
